|
|
(Your shopping cart is empty)
|
|
 |
|
|
 Professional-Grade Front-Loading Kilns
- Includes L&L’s exclusive hard ceramic holders that protect the elements and brick.
- Elements on sides, back and door for even heating. (Optional Bottom Elements).
- Cone 10 Operation.
- Energy Saving 3” Brick with 2” of back-up insulation.
- Includes an arched roof.
- Firebrick is made in modular pre-cemented sections (even the arch). Note: larger models have 4-1/2” of brick with 1/2” of back-up insulation.
- Heavy-Duty Welded Case Construction.
- Plug Door with tadpole gasket for tight seal with adjustments.
- Solid Heavy-Duty Hinge with thrust bearings. Positive strong door latches.
- Door Shut-Off Switch.
- Protected Type K Thermocouples. (Type S are optional).
- Zone Control included for even heating.
- DynaTrol Control with 4 simple Easy-Fire ceramic programs and 6 Vary-Fire programs. (Optional Dawson Kiln-Sitter Back-up control).
- Complete Visual Instruction Manual.
- Ventilated Control Panel - Mounted Off Kiln - for Long Component Life
- Three Year Limited Warranty!
- CLICK HERE FOR ELECTRICAL SPECS FOR ALL VOLTAGES
The Easy-Load Professional- Grade Front-Loading Kiln meets the needs of schools, studios and potters who need a well-built easy to load cone 10 kiln. The proven technology of the Dyna-Trol Program Control automates the firing process. The even element spacing and built in standard zone control ensure even heating. The insulation system features an arch, 3” or 4-1/2” (on larger models) of firebrick with mineral wool back-up, and a gasketed plug door. All firebrick sections have interlocking heat-locks to prevent heat leakage.
 The front-loading kiln with Dyna-Glow Element Holders!
Check Out These Superior Features !!! :
*The hearth height of the EL2436-S is 20” at no extra charge with a smallest door height of 65”. All voltages available. 480 volts is optional for an extra charge. Type S Platinum Thermocouples are optional. Dawson Kiln Sitter Back-up Safety Control is optional. Bottom elements are optional. Bottom elements are controlled by the bottom zone and have adjustable power output. Vent-Sure downdraft vent system is optional. Note that a forklift/rigger is required to remove the door.
 One Post kit includes six each 1/2”, 1”, 2”, 4”, 6”, & 8” high 1-1/2” square ceramic posts. The number of post kits varies with model and is shown above. Furniture kits include dark safety glasses, insulated gloves for unloading and 5 lbs of cone 10 kiln wash.
INSTALLATION AND UNLOADING:
These are large heavy kilns. You must have the appropriate facilities, manpower and equipment to move these into place. They can not be moved up stairs. The door size that they fit through is critical. Be sure to measure every door that the kiln must move though. Except for the EL1824 the door of the kiln must be removed to get the dimension down to the stated specification. (The control panel does not need to be removed).
HEARTH HEIGHT & DOOR PASS THROUGH:
See above for standard hearth height (inside bottom of the firebrick chamber to the floor). The EL2436 is available as a special short model (EL2436-S) with a hearth height of 20” and a smallest door pass-through of 34-1/2” by 66” high.
Standard Features
- Adjustable door, plug seal with gasket,
- replaceable brick sections,
- arched roof on kilns that are 24” or wider,
- 3” of firebrick with 2” of highly insulating mineral wool as back up,
- 3/16” solid steel welded case with integrated stand,
- solid peephole plugs,
- control panel mounted with air space between it and the case,
- branch fusing in control panel,
- automatic zone control with two or three 8 gauge type K thermocouples with ceramic protection tubes,
- door shut-off switch,
- heavy-duty elements on back, sides and door.
- All models are direct wired.
- These models are not UL listed.
- 3 Year Limited Warranty.
- Packing for Common Carrier is included in the price. Shipping is FOB Aston, PA. Class 85.
Bottom Element Option
- Bottom elements option available on any model
Voltage Options
- 240 or 208, single phase or three phase are all standard options. K.W. does not change . . . . .no charge
- 220 volts single phase or 380 volts wye or delta (for non-US installations) . . . . . . . . . . . . . . .no charge
- 480 volts, 3 phase in a NEMA1 box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .available
Control Options
- A Dawson Kiln Sitter is available as safety backup to the automatic control . . . . . . . . . .available
- 120 volt power supply with electrical noise filter for the automatic control . . . . . . . . . .available
- Pyrocil metallic type K thermocouples instead of 8 ga type K TCs with ceramic protection tubes .. . . . . .no charge
- Type S platinum thermocouples (2 required for 18” kilns, 3 required for all other models) . . . . . . . . . .available
- KISS Computer Software to monitor control. . . . . . . . . .available
Vent System
|
|
|
L & L Kilns Easy-Load Series Front Loading Pottery Kilns
|
|
|
|
