Home > Kilns > L&L Kilns > L&L Hercules Front Loading Kilns >

L&L Hercules Small Front Loading Kiln 2424 : 8 Cu Ft'


L&L HERCULES SMALL FRONT LOADING KILN
L&L HERCULES SMALL FRONT LOADING KILN


 
Alternative Views:


L&L HERCULES SMALL FRONT LOADING KILN
List Price: $8,680.00
Our Price: $8,486.00
You save $194.00!



Product Code: LKHER

L&L Furniture Kit

L&L Furniture Kit for Hercules Kiln 15% Off! [Add $318.75]
L&L Genesis Touch Screen

L&L Genesis Touch Screen Controller Upgrade [Add $125.00]
L&L Vent Sure

L&L Vent-Sure Kiln Vent System [Add $385.00]
L&L Vent Control

Add Intergrated Vent Control [Add $150.00]
Electrical Service

240Volt/Single Phase
208Volt/Single Phase
240Volt/Three Phase
208Volt/Three Phase

Qty:  
Description
 

L&L Kilns:  Hercules Front-Loading Kilns


Furniture Kit

H-B-2424/00 
 

Features

Performance

Automatic Zone Control
Premium Firebrick
DynaTrol Multi-Program Zone Control

Durability

Thermocouple Protection Tubes
Powder-Coated Thick Welded Case
Hard Ceramic Element Holders
Thick 8 Gauge Thermocouples
Proprietary Reflective Coating Hardens & Seals Brick

Ease of Use

Solid Wide-View Peephole Plugs

Support

Superior Technical Support

Safety

Listed to UL499 Standard by MET

OPTIONS

120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns
Eurotherm Three Zone Industrial Computer Control
Kiln Sitter Back-Up Safety Option
KISS Computer Interface & Datalogger for DynaTrol Control
Pyrocil Metal Sheathed Industrial Thermocouples
Type S Platinum Thermocouples

Elements & Power

480 Volt Option
APM Sintered Powder Metal Elements
 

Easy-Load "Hercules" Front-Loading with Multi-Program Zoned DynaTrol, separate attached stand, multi-layered insulation, full arch roof, side, back and door elements, heavy-gauge welded case.


Description

No assembly required.
Solid steel case (11 gauge) with separate but attached welded square tubing stand. Feet include anchor pads with anchor points.
Heavy-duty door hinges to the left (special option allows it to be hinged on the right). Door opens all the way so that the door opening is completely unobstructed.
The welded angle-iron stand is separate but attached to the case. It includes leveling bolts and holes for anchoring the kiln to the floor.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
Solid ceramic peephole plugs with full 1” diameter. Two total: one per section.
Limited Three Year Warranty.

Control Specifications

DynaTrol Multi-Program Zone Control
Two control zones with two separate thermocouples. 
8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (6.5" long /165mm)
Mounted on panel
Separate attached to right side.
Control box cover is hinged for easy access to inside of control box.

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Certifications and Markets

  • InternationalMade for USA market only
  • CE
  • UL499MET-us listed to UL499 Standards in the US only
L&L Hercules Kiln Specs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kilns > L&L Kilns > L&L Hercules Front Loading Kilns